top of page

Grupo

Público·17 miembros

Bitvise SSH Client 7.43 License Key Full Download


If you are an organization using Chocolatey, we want your experience to be fully reliable. Due to the nature of this publicly offered repository, reliability cannot be guaranteed. Packages offered here are subject to distribution rights, which means they may need to reach out further to the internet to the official locations to download files at runtime.




Bitvise SSH Client 7.43 License Key Full Download



Bitvise SSH Client 9.26EULA:- We updated our EULAs to formalize our existing practices regarding the nature and behavior of our software (it is a product, not a service; the data it handles is not sent to Bitvise; risk tradeoffs with updates) and the way we provide support (via email and our case management system, in written form).Installation:- The SSH Client installer now offers the option whether to install WinFsp. WinFsp is required to use the SSH Client's SFTP drive feature, but is not needed for other functions.- The SSH Client can now use WinFsp installed from another source, such as the official WinFsp distribution, or installed by a third-party application, instead of installing its own. We cannot guarantee reliability or performance when using such other versions of WinFsp. However, the SSH Client now tries to use them.Cryptography:- OpenSSL version updated to 1.1.1s. Bitvise software primarily uses Windows CNG for cryptography. We use OpenSSL for specific cryptographic algorithms not supported by Windows. Currently, these are chacha20-poly1305 and on older Windows versions, the elliptic curve secp256k1.Terminal:- Since version 9.23, the SSH Client's terminal window disables client-side scrolling when the server switches to the alternate screen. This is correct behavior, and it avoids confusing users, but it has confused other users, who were used to scrolling in the alternate screen.- The SSH Client's terminal window now displays a padlock icon in the title bar when the alternate screen is enabled. This indicates that the terminal window is in a special state and explains why scrolling is disabled.- The SSH Client's terminal window did not work on Windows XP. Fixed.SSH Server Remote Control Panel:- When using the SSH Client to remotely administer Bitvise SSH Server, the SSH Server Remote Control Panel would exit unexpectedly when trying to manually apply an update. Fixed.Bitvise SSH Client 9.25Graphical client:- User Authentication Banner dialog text can now be selected and copied to clipboard- Improved default file browse filter for client authentication keypair importBitvise SSH Client 9.24General:- SSH Client help windows now allow selection and copy & paste- Updated keyboard shortcuts in the pop-up menu for the SSH Client icon in the system notification area. This resolves conflicts and makes the shortcut keys consistent with Ctrl+Shift shortcuts in SSH Client windows.SSH:- The SSH Client now displays the signature algorithm used during client authentication with a public key- The default list of submethods for keyboard-interactive authentication is now emptyCommand-line clients:- Improved output of command-line clients when output is piped into another program, or redirected into a filesftpc:- When output is redirected, sftpc no longer truncates file and directory paths shorter than 1,000 bytes. For easier processing, file transfer results such as "OK" and "in sync" are now displayed as "" and ""- The remove/delete commands del, ldel, rm, lrm, rmdir and lrmdir now support the -ifExist parameter. If passed, this parameter causes the command to test whether the path exists before attempting to delete it. If the path does not exist, the command succeeds.Terminal:- Due to Ctrl+Shift+... keyboard shortcuts new in versions 9.xx, the terminal window in the graphical SSH Client would no longer send to the server Ctrl+Shift key combinations such as Ctrl+Shift+F1. These combinations are now sent again.- The clear command now causes the terminal window to scroll down instead of overwriting visible screen content- A full reset, or a soft terminal reset, now avoids clearing the primary screen buffer, such as when the screen command exitsBitvise SSH Client 9.23Terminal:- When the alternative window buffer is activated, the terminal window now prevents client-side scrolling. This interfered with display of server-side applications which provide their own scrolling via keyboard.SFTP drive:- There exist servers, such as GlobalSCAPE, which support neither the SFTP request space-available, nor the alternative [email protected] These requests are used to query free space on the server. With such servers, this information cannot be queried, so the SSH Client will now report a very large amount of free space on the SFTP drive. The client previously reported zero free space, which prevented some applications from writing files.Bitvise SSH Client 9.19Terminal:- Restored behavior from previous SSH Client versions, including 8.xx, where right-click can be used immediately after selecting to copy-and-paste the selected text- The DECSTBM message (Set Top and Bottom Margins) should now be handled correctlyspksc:- The command-line client for the SSH Public Key Subsystem, spksc, now supports commands to list local keys in addition to public keys configured for public key authentication on the server.- If Ctrl+C was pressed during command execution, spksc would previously hangHost key manager:- When using the Modify Host Key dialog, pasting a host address containing spaces would cause the SSH Client to crashBitvise SSH Client 8.53- When using one of the key exchange methods with Diffie Hellman group exchange, the SSH Client and FlowSsh could perform an invalid memory access. Invalid DH group size parameters could be sent to the server. Fixed.Security Clarification:- We are receiving many inquiries about whether our software is affected by the recent Log4j vulnerability CVE-2021-44228- Bitvise software does not use Log4j, and does not interact with itBitvise SSH Client 8.52This is not a new feature release, but a successor to 8.49 with continued maintenance updates:Graphical client:- Certain user interface elements would not display correctly on Windows 11. Fixed.Command-line use:- The SSH Client's command-line clients (sftpc, stermc, sexec, stnlc, spksc) now support the widely accepted "--" syntax to identify the end of named parameters and the beginning of positional parameters.Bitvise SSH Client 8.49SFTP:- When used under Parallels for Mac, the SSH Client was unable to list folders shared by the Mac (for example, MacHomeDesktop). This arose because the SSH Client used an advanced Windows filesystem API which the Mac does not implement. The SSH Client now uses a simpler version of this API, allowing the listing of Mac folders.sftpc:- The get command now supports a -wait switch. This causes the get command to wait for the server's confirmation that the file has been closed before continuing any further actions. When used with conjunction with -del, this causes sftpc to wait for the server's confirmation that the file has been closed before attempting to delete the file.- sftpc now supports a new wait command. This causes sftpc to wait until it receives from the server any pending confirmations for file and directory close requests, before proceeding with any other actions. If there are no outstanding close requests pending confirmations, the wait command does nothing.stermc:- When using the stermc terminal shell command-line client, if the remote shell exited with a non-zero exit code, the SSH Client's totermc or bvtermc terminal client process would continue to run after stermc exits. These processes would potentially interfere with console input. Fixed.Command-line clients:- When input or output is redirected, then by default, the SSH Client's command-line clients (including sftpc, sexec, stnlc, stermc and spksc) will now use the input/output code page associated with the console in which they run (Windows functions GetConsoleCP and GetConsoleOutputCP), instead of the system-wide ANSI code page (Windows function GetACP). This causes output from Bitvise command-line clients to respect the code page set using chcp. For example, when chcp has been used, sftpc >> file.txt will now use the same code page as echo xxxx >> file.txt.- Improved BOM handling when output is redirected with code pages UTF-8, UTF-16, and UTF-16BE. The BOM will now be consistently emitted when redirecting into an empty file, but not when redirecting into a non-empty file or a stream.Bitvise SSH Client 8.48General:- The Notes tab is now scrollable and may contain much more textSFTP:- SSH Client version 8.46 introduced an issue where text file uploads would not work when using the file transfer modes Auto Std or Text, which are available in SFTP protocol versions 4 and 6. Fixed.- When downloading a file using the Auto Std file transfer mode, which is available in SFTP protocol versions 4 and 6, the SSH Client first opens the file in binary mode. If the client detects that the file is textual, it closes and reopens the file using the flag SSH_FXF_TEXT_MODE.- Some servers do not handle this scenario gracefully and do not allow the file to be reopened. With these servers, the Auto Std mode cannot work. In this case, the SSH Client will now display a more useful error to suggest changing the file transfer mode.- The SFTP v4 draft specification from 2002 contains a typo in the definition of SSH_FILEXFER_ATTR_PERMISSIONS. This flag is defined with incorrect value 0x40 instead of the correct value, 0x04. This conflicts with previous and subsequent SFTP versions, as well as SSH_FILEXFER_ATTR_ACL defined in the same draft. Implementations should use the correct value, 0x04.- There exist implementations of SFTP v4 that do not identify this error, and do not use the correct value. To aid compatibility with such servers, the SSH Client will no longer request SSH_FILEXFER_ATTR_PERMISSIONS as part of SSH_FXP_LSTAT if the Permissions column is not enabled on the Remote pane of the Browse tab.Bitvise SSH Client 8.47SSH:- The SSH Client will now recognize a server with "MFT" in its SSH version string as a variant of "J2SSH_Maverick". This means the SSH Client will no longer send SSH_MSG_EXT_INFO by default to such servers. See the previous compatibility change for J2SSH_Maverick, in version history for SSH Client version 8.42.Authentication:- When the -keypairFile parameter is used to specify a password-protected keypair in a non-Bitvise format, and no valid passphrase is provided, the log message will now be more useful.Remote Desktop:- When using the single-click Remote Desktop forwarding feature on an ARM version of Windows, the SSH Client will now disable hooking of the Remote Desktop client (MSTSC). The SSH Client normally does this on Windows x86 and x64 so that the Remote Desktop window title can reflect the destination of the Remote Desktop connection. However, this prevented single-click Remote Desktop forwarding from functioning on ARM versions of Windows.Bitvise SSH Client 8.46SFTP:- Since version 8.45, the SSH Client now uses SFTP v6 file open block flags SSH_FXF_BLOCK_WRITE and SSH_FXF_BLOCK_ADVISORY if the server advertises support for them. This helps avoid corruption of files while they are being transferred. We have received a report of a server that advertises support for these flags, but fails an open request if the flags are used. The SSH Client will now repeat an open request that fails this way, without the flags.Command-line clients:- When using Bitvise SSH Client command line clients sftpc, stermc, sexec, stnlc or spksc using a -keypairFile parameter that points to an encrypted keypair in non-Bitvise format, but without a -keypairPassphrase parameter that would provide a decryption passphrase, the SSH Client would display a cryptic error. The error is now less cryptic.Bitvise SSH Client 8.45Automatic updates:- If the automatic update process encountered an error while downloading a new version installer from the primary download location, resulting in a partial executable being stored; and if download was then successful from the secondary download location; the resulting executable would be corrupted- Improved the automatic update locking mechanismsSSH:- When displaying the host key received from the server, the SSH Client will now display the signature algorithm (e.g. RSA over SHA-256) rather than just the host key algorithm (e.g. RSA)Graphical client:- When the SSH Client was started hidden in the system notification area, it would cause a phantom Alt-Tab menu entry to appearSFTP:- When uploading files using SFTP v6; and if the server advertises support for either the block flag SSH_FXF_BLOCK_WRITE or the combination SSH_FXF_BLOCK_WRITE SSH_FXF_BLOCK_ADVISORY; then the SSH Client will request one of these block flags when opening the file. This is to prevent premature actions by other server-side processes or file transfer clients that can modify or corrupt the file before the upload is complete.- Uploading to a blind drop location that does not permit a directory listing could crash the SFTP window or the SSH Client process- For improved compatibility with blind drops, it is now possible to navigate the Local and Remote panes to any location, even one that results in an error or does not allow a directory listing. An error dialog will be displayed when attempting to list such a directory, but it is now possible to try transferring files to or from such locations regardless.Command-line clients:- The log utility would output its own newlines as CRLF, but would record newlines from child processes as they were written by the process. If the child process used LF newlines (without CR), the output newline convention would be inconsistent. The log utility now consistently outputs newlines as CRLF.Bitvise SSH Client 8.44SSH:- Bitvise SSH Client and FlowSsh will now recognize servers with "Maverick_SSHD" and "GoAnywhere" in their SSH version strings as variants of "J2SSH_Maverick". This means Bitvise SSH Client and FlowSsh will no longer send SSH_MSG_EXT_INFO by default to such servers. See the previous compatibility change for J2SSH_Maverick, in version history for Bitvise SSH Client and FlowSsh versions 8.42.- If a client authentication key has been accepted by the server for authentication, the SSH Client will no longer prevent its use due to the server's server-sig-algs extension. In addition, the SSH Client will now log if a key is not used due to this extension.- Graphical client:- A new or reset profile will no longer open a terminal and SFTP window automatically, by default. This improves behavior when connecting to servers that limit SSH sessions to a single concurrent channel. Automatic opening of these windows can still be enabled using the same settings on the Options tab.- The SSH Client's buttons would be hidden under Windows UI elements in Windows 10 Tablet mode. Fixed.- The SSH Client will now display clearer information when an update is available but cannot be started.Terminal:- When using xterm and other non-bvterm protocols, the graphical SSH Client and stermc now support the sending of the following Alt + key combinations: Alt + Left Arrow, Right Arrow, Up Arrow, Down Arrow, Backspace, Page Up and Page Down. In addition, the graphical client also supports Alt + Enter. Alt + Enter is not supported in stermc because it is used by the Windows console to enter or exit full-screen mode- When using xterm and other non-bvterm protocols, the speed of screen painting in the graphical SSH Client is now significantly improved- The graphical SSH Client and stermc now support a terminal window resize initiated by an escape sequence from the server- The graphical SSH Client and stermc will now accept xterm's 16-color and 256-color sequences even when regular xterm is in use (as opposed to xterm-16color or xterm-256color). This better supports programs such as byobu that send these sequences under plain xterm- When switching between normal and alternate screens, the SSH Client would fail to clear the alternate screen. Fixed- When using xterm and other protocols except bvterm and ANSI, the SSH Client would previously start set to use "application" cursor keys. To start with "standard" cursor keys, the setting Alt. cursor keys had to be enabled, or in stermc the parameter -altCurs had to be used- The SSH Client will now start by default using "standard" cursor keys. The relevant setting has been replaced with App. cursor keys, and stermc now supports the parameter -appCurs to start instead with "application" cursor keys- Changed Unicode character widths for about 6% of assigned Unicode code points from 0 to 1, and for another 8% of code points from 2 to 1. This aligns more closely with character widths used by servers and avoids unintended discrepancies in rendering- On the Terminal tab, the SSH Client's Default colors dialog now provides both the "Old Windows" and "New Windows" palette options. To match use of colors in other terminals, the New Windows palette is now the default choice. Previously, it was xterm- The command line terminal client, stermc, now also supports the new palette choices using the -palette parameter- When using bvterm, the new Windows 10 console produces cursor artifacts when the cursor is moved outside the viewport. The SSH Client now takes steps to avoid thisSSH Server Remote Control Panel:- When using the CSV export feature in the SSH Server Remote Control Panel for SSH Server versions 8.xx, the CSV export would fail if the data contained a reversibly encrypted password or secret keyBitvise SSH Client 8.43Installation:- The SSH Client adds its installation directory to the system PATH environment variable when installing, but did not remove it when uninstalling. The SSH Client installation directory is now removed from PATH when uninstalling. Reinstallations or upgrades from version 8.43 will briefly remove and then re-add the SSH Client installation directory to PATH.SSH:- Certain versions of the Pragma Fortress SSH server - including the most recent version when testing - can send a corrupted SSH authentication banner where an inexact, duplicate copy of the banner message is included before the language tag. SSH Client versions 7.xx and earlier could connect because they ignored the language tag, but SSH Client 8.xx versions would not because they check that the language tag does not exceed an unreasonable length.- The SSH Client now allows an exception for this server where the incorrect encoding is ignored. If the server cannot be identified as "Pragma FortressSSH", the language tag length check remains enforced.Command-line clients:- Previously, an implied command such as the following:sexec [email protected] dir /?- ... would incorrectly cause command line clients including sftpc, stermc and sexec to display their own he


Acerca de

¡Bienvenido al grupo! Puedes conectarte con otros miembros, ...
bottom of page